Installation Tips

Step-by-step installation guides and pro tips from TrakMotive for CV axles, drive shafts, window regulators, and more. Get it done right the first time.

CV axle replacement tips covering retaining clips and axle nut installationV

CV Axle Replacement Mistakes You Need to Avoid

A successful CV axle replacement requires attention to small but important details. Learn how retaining clips and axle nuts can affect installation and long-term reliability.

Pre-Install Checks & Fixing Vibration After Replacement

Lesson 8 of 10

What to check before installing a CV axle, and how to diagnose vibration after replacement.

Tips for Removing Stubborn CV Axles

Lesson 10 of 10

Pro tips for freeing stuck CV axles safely without damaging the transmission, seals or suspension.

Avoiding Common Installation Errors

Lesson 6 of 8

The most common drive shaft installation mistakes that cause noise and vibration comebacks, and how to avoid them.

U-Joint Orientation & Phasing Explained

Lesson 7 of 8

Why TrakMotive U-joints never need greasing, and why proper U-joint phasing prevents driveline vibration.

Tips for Removing a Rusted or Seized Drive Shaft

Lesson 8 of 8

Safe techniques for removing a rusted or seized drive shaft without damaging the yokes, caps or flanges.

Pro Installation Tips for a Clean, Fast Job

Lesson 7 of 10

Five pro tips for a clean, fast, quiet window regulator install with no comebacks.

How to Avoid Kinks & Binds for a Smooth Install

Lesson 9 of 10

The three most common causes of window regulator binding, and how to avoid them for a smooth, quiet install.

Essential Specialty Tools for CV Axle Replacement

The specialty tools you need for a safe, efficient, damage-free CV axle replacement.

CV Axle Installation Tips: Avoid Costly Mistakes

A CV axle installed the right way is straightforward — installed the wrong way, it can lead to comebacks and frustrated customers. This course covers the details that matter most.

Window Regulators – When You Notice Them, There’s Trouble

Why Window Regulators Fail Window regulators are one of the most frequently used mechanisms inside a vehicle’s door, responsible for raising and lowering the window using either a manual crank or an electric motor driving a scissor-style or cable-driven system. While modern regulators offer convenience, they are exposed to constant wear and tear. High usage, […]

A Good Axle Can Still Fail

Even a high-quality CV axle can fail if it’s installed wrong. Here are four common installation mistakes that lead to comebacks, plus a quick checklist to catch them before the car leaves the lift.

9 Essential CV Axle Installation Tips for Technicians

Nine essential CV axle installation tips to help technicians verify fitment, prevent component damage, and avoid common installation problems.