Professional Installer
TrakAcademy content for professional installers and technicians, from standard shop installs to advanced diagnostic guidance.

Clunks, Clicks & Vibrations: How to Diagnose CV Axle Complaints
TrakMotive product manager Miguel Cornejo joins Shop Owner Solutions to cover why CV axles fail, how to tell an inboard clunk from an outboard click, how to source the right replacement, and the install habits that cause comebacks.

TrakMotive Monobloc Tube CV Axles: Strength, Performance & Efficiency
Monobloc Tube CV Axles combine strength and lightweight construction to support higher torque loads, smoother power transfer, and improved vehicle performance.

Window Regulator Problems: Symptoms, Diagnosis & Replacement Tips
From grinding noises to stuck or misaligned windows, learn how to identify common window regulator problems and why quality replacement components matter.

TrakMotive HD Xtreme™ CV Axles: Built for Demanding Driving Conditions
Heavy-duty demands aren't limited to commercial trucks. Learn how TrakMotive HD Xtreme CV Axles are engineered for fleets, rideshare vehicles, and other demanding applications.

Drive Shaft Problems: Common Symptoms, Diagnosis & Installation Tips
Excessive vibration, clunking noises, and shuddering under acceleration can indicate drive shaft problems. Learn how to identify common symptoms and prevent premature failure.

CV Axle Replacement Mistakes You Need to Avoid
A successful CV axle replacement requires attention to small but important details. Learn how retaining clips and axle nuts can affect installation and long-term reliability.

Don’t Just Replace. Upgrade to TrakMotive HD Xtreme CV Axles.
Clicking during turns or shuddering under acceleration? Learn how TrakMotive HD Xtreme™ CV Axles provide an upgraded replacement solution for demanding driving conditions.

Beyond OE: TrakMotive Window Regulator Design Improvements
TrakMotive Window Regulators incorporate design improvements that support durability, quieter operation, and reliable performance. See the features highlighted on Two Guys Garage.

How Intermediate Shafts Improve Front-Wheel Drive Performance
Intermediate shafts play an important role in front-wheel drive performance. Discover how TrakMotive Intermediate Shafts help balance CV axle geometry, reduce torque steer, and support driveline durability.

CV Axle 101: What It Is and How It Works
Lesson 1 of 10
How CV axles work, what the inner and outer joints do, and why protecting the boots matters.

What Sets TrakMotive CV Axles Apart from the Competition
Lesson 2 of 10
Why TrakMotive CV axles fit right the first time and hold up: 100% new, ISO-certified, OE-quality materials.

OE Quality Materials: What It Means for Performance
Lesson 3 of 10
What "OE-quality materials" really means inside a TrakMotive CV axle, from the shaft to the grease.

Precision Fit Matters
Lesson 4 of 10
How OE tolerances, precision splines and pre-installed ABS rings make TrakMotive CV axles fit right the first time.

New vs. Remanufactured: Why New Wins
Lesson 5 of 10
Why a 100% new CV axle beats a remanufactured one for fit, quality and fewer comebacks.

Axles Built for Lifted, Work & Everyday Vehicles
Lesson 6 of 10
How TrakMotive matches the right CV axle to stock, lifted and work vehicles.v

Diagnosing Clicking Sounds While Turning
Lesson 7 of 10
What a clicking noise while turning means, where it comes from, and how to confirm it before replacing the axle.

Pre-Install Checks & Fixing Vibration After Replacement
Lesson 8 of 10
What to check before installing a CV axle, and how to diagnose vibration after replacement.

Spotting and Preventing CV Boot Damage
Lesson 9 of 10
How to spot CV boot damage early, what causes splits and leaks, and how to avoid a costly axle replacement.

Tips for Removing Stubborn CV Axles
Lesson 10 of 10
Pro tips for freeing stuck CV axles safely without damaging the transmission, seals or suspension.
What Sets Our Drive Shafts Apart
Lesson 1 of 8
What makes TrakMotive drive shafts different: OE-level precision, premium U-joints and pre-balanced assemblies.
OE-Fitment, Performance Tested
Lesson 2 of 8
How OE-grade materials and precise manufacturing give TrakMotive drive shafts their strength, balance and reliability.
How Our Drive Shaft Balancing Eliminates Vibration Complaints
Lesson 3 of 8
How factory dynamic balancing on every TrakMotive drive shaft prevents vibration complaints after replacement.
Aluminum vs. Steel: Material Benefits Explained
Lesson 4 of 8
The benefits of aluminum vs. steel drive shafts, and how to choose the right one for the vehicle and application.
Diagnosing Driveline Vibration
Lesson 5 of 8
How to tell when the drive shaft is causing a vibration complaint, and what to check before pulling it.
Avoiding Common Installation Errors
Lesson 6 of 8
The most common drive shaft installation mistakes that cause noise and vibration comebacks, and how to avoid them.
U-Joint Orientation & Phasing Explained
Lesson 7 of 8
Why TrakMotive U-joints never need greasing, and why proper U-joint phasing prevents driveline vibration.
Tips for Removing a Rusted or Seized Drive Shaft
Lesson 8 of 8
Safe techniques for removing a rusted or seized drive shaft without damaging the yokes, caps or flanges.
Why Our Regulators Outperform OEM
Lesson 1 of 10
How TrakMotive window regulators improve on OE design to fix the failure points that bring customers back.
Pre-Installed Motors Save Time & Hassle
Lesson 2 of 10
Why a window regulator with the motor pre-installed means a faster, safer install and fewer comebacks.
Building Better Cable-Driven Regulators
Lesson 3 of 10
How TrakMotive builds cable-driven window regulators that eliminate the weak points found in OE designs.
Built-In Safety: Anti-Pinch & Load Sensing
Lesson 4 of 10
How anti-pinch and load sensing in TrakMotive window regulators protect passengers and the motor, with no extra wiring.
Installer-Friendly Design for Faster Repairs
Lesson 5 of 10
The design details that make TrakMotive window regulators faster to install, with no realigning and no missing hardware.
Diagnosing Regulator Fatigue Before Failure
Lesson 6 of 10
The early warning signs of window regulator fatigue, and how to catch them before a full failure.
Pro Installation Tips for a Clean, Fast Job
Lesson 7 of 10
Five pro tips for a clean, fast, quiet window regulator install with no comebacks.
Scissor vs. Cable Window Regulators Explained
Lesson 8 of 10
The difference between scissor-style and cable-driven window regulators, and how to order the right one the first time.
How to Avoid Kinks & Binds for a Smooth Install
Lesson 9 of 10
The three most common causes of window regulator binding, and how to avoid them for a smooth, quiet install.
Fixing Windows That Slip Off Track
Lesson 10 of 10
Smart steps to diagnose a window that slips off track, before you replace the regulator.
Intermediate Shaft Warning Signs
When CV axle replacements don't fix vibration or noise, the intermediate shaft may be the real culprit.
Essential Specialty Tools for CV Axle Replacement
The specialty tools you need for a safe, efficient, damage-free CV axle replacement.
Black Line™ CV Axles: Engineered From the Surface In
See what makes Black Line™ CV axles different, from the bonded protective finish to the new chloroprene boot.

Why Choosing a NEW Drive Shaft Assembly is the Right Choice
When a drive shaft assembly needs replacing, the choice between new and other alternatives has real implications for performance and reliability. TrakMotive's newest TrakAcademy course makes the case for going new.

Addressing CV Axle Issues in Lifted Trucks
Lifted vehicles change CV axle angles, leading to noise and early wear. Discover how TrakMotive’s XTT axles solve common Toyota and Subaru lift-kit issues.

Improve Your TrakAcademy Knowledge of Monobloc OE CV Axle Technology
Modern vehicles are pushing CV axle technology in new directions, and Monobloc OE design is one of the biggest shifts shaping the category. This course covers what it is and why it matters.

CV Axle Basics, Trends, and Key Benefits of the TrakMotive CV Axle Program
CV axles are a part everyone recognizes but not everyone fully understands. This course brings the basics, trends, and TrakMotive's program advantages together in one place.

Understanding Intermediate Shafts: What are They and What Do They Do?
Intermediate shafts don't always get the attention they deserve — until one starts to fail. This course breaks down what they are and how to identify early warning signs.

TrakMotive’s Guide to Flat Spline CV Axles: From Fundamentals to Installation
For BMW, MINI, and other compatible vehicles, the difference between a standard axle and a flat spline design matters more than most people realize. This course walks through it all.

CV Axles for Lifted Trucks & Off-Road Applications
A lift kit changes the angles and stresses a CV axle has to deal with — often in ways OEM parts weren't designed to handle. This course explains why and what to look for.

The TrakMotive Advantage: New Premium CV Axles vs. Remanufactured
Deciding between a new CV axle and a remanufactured one can seem like it comes down to price. This course explains why there's a lot more to the story.

Noise Symptoms Associated with a Worn CV Axle
A worn CV axle rarely fails silently — it usually tells you something's wrong long before it gives out. This course breaks down the noises and what they mean.

Practical Solutions to Common CV Axle Problems
Some of the most frustrating CV axle issues don't come from the axle itself — they come from the components around it. This course covers practical fixes.
